To support Autonnic's growth through new product development, the company is seeking a skilled and experienced Engineer who will report to the MD. Autonnic Research is a world leader in fluxgate technology, and is situated in Tollesbury, Essex. This reputation has been built on its continuous worldwide supply of fluxgate sensors and sub-systems, its unrivalled understanding of the technology, and a commitment to quality, reliability and engineering support for marine and robotic guidance systems. For further information about Autonnic and its products go to our website. The Task: To cover all aspects of engineering the company's fluxgate components and sub-system modules including electrical, software and mechanical design. To liaise with the company's customer base, providing applications development engineering and bespoke designs as required. To support the production departments through the development of assembly tooling and in-house test equipment. Requirements: Suitable candidates for the role of will need to have: A... (more job details)

As an important member of our development team this role has the following responsibilities and experience requirements. Key Responsibilities Design of complex multi-layer PCB layouts Responsible for interacting with various vendors, component manufacturers and others for product design. Institute process methodologies to enable efficient design/development and ensure introduction of "First time right" products Education and Experience Required 15+ years experience of PCB layout design. 10+ years of current experience using Cadence Allegro PCB Design & library management 10+ years experience with high speed and impedance constrained circuits. 10+ years experience with compact, dual side assembly design. 10+ years experience with very complex multi layer (12+) boards using manual and auto-routing techniques Experience with HDI design. Experience with BGA pitch of equal or less than 0.5mm. Experience creating accurate symbols from data sheets or spreadsheets Proven track record to design & manage all aspects of PCB design. Ability to collaborate and... (more job details)

The position In this position you report to the Director of Projects based in Switzerland. As Project Manager, you are the primary point of contact to the customers, for the project under your responsibility. You are responsible for planning and organizing the project activities, and making sure they are agreed both internally and with the customer. Together with your team, you are responsible for delivering the projects within the quality, NRC & RC costs and schedule targets. This includes compliance to technical and non-technical customer requirements, industrialization and readiness for production, on-time delivery of material and documentation. With proven leadership, persuasion and project management abilities, you have the capacity to lead a cross-functional team and manage your projects in regards to challenging customer contracts, and in an international environment. Your profile Skilled Engineer, mechanical or electronics, with a strong experience as Team Leader or Project Manager Over 5 years experience... (more job details)

Mechanical Engineer wanted for a role based in the Midlands. The rate is in the range of £250-£400 per day, depending on level of experience, for a minimum of 12 months. You will work within the design team, taking one or more components through the design process to final design substantiation, review and acceptance. The principal components covered by the scope of work are valves, pumps, and installations components (eg mountings, flow meters etc). Requirements Experience in one or more of the following technical disciplines is required; Concept design and development ASME structural integrity assessments FMEA production and review Design for manufacture V&V planning and design test specification Design substantiation Degree-qualified or equivalent in Mechanical Engineering or equivalent Responsibilities Identify, review and develop component requirements Research Legacy components Concept Development of engineering components, including optioneering, design development, concept evaluation, and scoping calculations. Draft component Design Definition Report and Design Substantiation... (more job details)

Mechanical Engineer - Consultancy Firm - Cambridge A highly prestigious, international consultancy firm based in Cambridge are looking to recruit a Mechanical Engineer to join their expanding Medical Technology Development team. As a Mechanical Engineer you will be expected to make a major contribution to various projects and developments. The position will require the Mechanical Engineer to apply his or her mechanical engineering abilities to the research and development of new medical devices. You will be joining a team of extremely talented and driven individuals. The Mechanical Engineers main responsibilities will be to generate concepts and detailed designs using CAD, tolerance analysis, production of drawings and manufacturing specifications and the transfer of designs to manufacture. In order to be considered for the Mechanical Engineer position you must have the following:.Experience of electro-mechanical systems..A degree in Mechanical Engineering or related subject..A good understanding of manufacturing and assembly processes, materials selection and... (more job details)

Mechanical Engineer wanted with experience of Minor Vessels Design for a role is based in the Midlands. The rate is in the range of £250-£400 per day, depending on level of experience, for a minimum of 12 months. You will work within the design team, taking one or more components through the appropriate stage in the design process. The work ranges from requirements capture and review of Legacy solutions, to concept development and evaluation, detailed design, final design review and substantiation. The components covered by the scope of work are all pressure vessels of various form and function. Requirements: Experience in two or more of the following technical disciplines is required; Pressure vessel design Concept design and development ASME structural integrity assessments FMEA production and review Design for manufacture V&V planning and design test specification Design substantiation Degree-qualified or equivalent in Mechanical Engineering or equivalent Responsibilities Research Legacy components Concept... (more job details)

Mechanical Engineer BSME with failure analysis background. 3-5 years experience using 3-d modelling software. Job Purpose: Designs mechanical and electromechanical products and systems by developing and testing specifications and methods. Duties:. Evaluates mechanical and electromechanical systems and products by designing and conducting research programs; applying principles of mechanics, thermodynamics, hydraulics, heat transfer, and materials.. Confirms system and product capabilities by designing feasibility and testing methods; testing properties.. Develops mechanical and electromechanical products by studying customer requirements; researching and testing manufacturing and assembly methods and materials; soliciting observations from operators.. Develops manufacturing processes by designing and modifying equipment for fabricating, building, assembling, and installing components.. Assures system and product quality by designing testing methods; testing finished- product and system capabilities; confirming fabrication, assembly, and installation processes.. Prepares product reports by collecting, analysing, and summarizing information and trends.. Provides engineering information by answering questions and requests.. Maintains product and company reputation by... (more job details)

Mechanical Engineer required with experience of working with components for a role is based in the Midlands. The rate is in the range of £250-£400 per day, depending on level of experience, for a minimum of 12 months. This job primarily involves reviewing, understanding and applying existing information consistently across components. The client is currently working on CESs for valves but are hoping to expand this to other components, eg pumps, in the near future. They are looking for engineers to work with an existing CES Team, undertaking the process of producing CESs and obtaining Technical Authority sign-off from their client. Requirements Experience in one or more of the following technical disciplines are required: Component design Design for manufacture Quality requirements for components in a nuclear steam-raising plant CAD modelling Degree-qualified or equivalent in Mechanical Engineering or equivalent Responsibilities Undertake the CES production process Deliver CES documents to stakeholders; set-up... (more job details)

Mechanical Design Engineer (Injection Moulding) required to work at our client's site in Cardiff. You will have experience of In House rapid Prototyping and 3D printing. The ideal candidate will have experience of Plastic Injection and a molding background. Key responsibilities/essential functions include: Managing own activities to update all required component part, assembly and customer drawings to a defined prioritization, creating the 3D model as required. Working closely with the Production Engineering and QC department to carry out this activity. Focus on achieving the drawing update schedule, providing a weekly update to direct manager. Working with suppliers to obtain dimensional reports of components and verifying the submitted information. Working with QC department and external vendors to obtain dimensional data for purchased and finished parts. Ensuring that all drawings are approved and added to the document control system following the defined procedures. Ensure that all drawings follow the standard dimension and... (more job details)

Mechanical Design Engineer Our client, an international electronics development and manufacturing firm is looking for a Mechanical Design Engineer to work as part of the printhead development team with specific responsibility for mechanical and functional design. The role covers the entire life cycle of the product from initial concept through design, validation, field trials, release into production and maintenance. The successful candidate will be completing design work using 3D CAD and FEA techniques, working with particular focus on fluidic and thermal performance. As such, for the position of Mechanical Design Engineer candidates should have experience of designing complex assemblies and have practical experience of designing for fluidic flow, thermal, shock and vibration considerations. The role will also involve designing to achieve the most cost effective solution for manufacture, and as such experience of lean manufacturing would be desired. Experience: Essential A degree in Mechanical Engineering or equivalent A good grounding... (more job details)

Mechanical Design Engineer Energy & Infrastructure - ODN Products ODF/FDT/FAT/ID Contract 1-2 years (Ger) Role: Senior Mechanical Design Engineer is required to collaborate with and assist the design team with the Energy and Infr product line. Assist with new designs to tight timescale's in a supportive team environment. This is a broad scope role however where you will be required to be flexible and get involved in many different aspects of production and assembly of these bespoke products. Leading and actively participating in the whole design process, including but not limited to; research, concept designs development. Knowledge of ProE/CAD Sheet metals, Casting, Plastics ect. Must have motion mechanism area design experience and have successful project experience.. Ability to track and control deliverables, schedules, budgets and resources.. Produce calculations to support designs.. You will be required to travel to Sweden and china for business (travel & accommodation expenses paid where applicable).... (more job details)

Mechanical Design Engineer - Cambridge A successful, international company, who specialise in the design, manufacture and sale of infrared technology for the aerospace, military and security sectors, are looking to recruit an experienced Mechanical Design Engineer to work on various infrared thermal imaging projects. As a Mechanical Design Engineer you will be working in the Mechanical Engineering department focusing on new product design and development. This will include 3D modelling, design analysis, drafting, liaising with suppliers and customers, prototype building, product testing and production support. To be considered for the Mechanical Design Engineer position you must hold:.High academic results throughout your career with a Degree in a relevant subject..A demonstrable understanding of technologies you have encountered in previous roles..A keen interest in mechanical design and development..Self motivation and the ability to work from leading edge design to straightforward mechanical drafting..Ability to work to tight time schedules whilst maintaining a high... (more job details)

Mechanical Design Engineer - Cambridge A successful, international company, who specialise in the design, manufacture and sale of infrared technology for the aerospace, military and security sectors, are looking to recruit and experienced Mechanical Design Engineer to work on various infrared thermal imaging projects. To be considered for the role you must hold:.High academic results throughout your career with a Degree in a relevant subject..A demonstrable understanding of technologies you have encountered in previous roles..A keen interested in mechanical design and development..Self motivation and the ability to work from leading edge design to straightforward mechanical drafting..Ability to work to tight time schedules whilst maintaining a high level of accuracy..Experience with CAD 3D (preferably SolidWorks)..Experience with new product design and development..Experience with rapid prototyping, injection moulding, 3D surface modelling, FEA and thermal analysis and the design of military products would be an advantage. As a Mechanical Design Engineer you will be... (more job details)

Mechanical Design Engineer - Market Leading Products - East Yorkshire Market leading company that takes a pride in producing luxury products for the European industry is looking for a mechanical design engineer to join new projects. This company continually improves their products to ensure that they meet customers expectations. They are always busy and they are looking to expand their team with a mechanical design engineer who has a flair for design! Candidates must have Degree or HND in Mechanical Engineering or similar Strong background in mechanical design experience 3D CAD experience (preferably Inventor) Experience working from concept through to manufacture This role involves working in a team of 15 engineers on a wide variety of products. You will be working from a sales brief, from a business relationship requirements and occasionally you will be working on bespoke products. These are luxury products so an eye for aesthetic design is... (more job details)

Principal Engineer - Mechanical Real pride, Real advantage A number of exciting opportunities for Senior Mechanical Engineers and Principal Engineers - Mechanical has arisen to join BAE Systems Submarine Solutions in Barrow-in-Furness, Cumbria. The successful candidates will be required to work on a number of cutting-edge, complex and challenging projects with the defence/marine industry. As Principal Engineer - Mechanical, your main responsibilities will involve: Your key responsibility will be to execute, evaluate, deliver and manage complex engineering and/or cross functional tasks or programmes of work recognising stakeholder and customer requirements and to identify and implement opportunities for personal and team development to ensure that professional capability of the business and individuals are maintained and improved. You will be responsible for the production of mechanical systems diagrams and technical specifications for pumps, compressors, etc, used in system (eg, air, hydraulics, sea water, cooling water systems); in addition you will produce supporting... (more job details)

Manufacturing Engineer -Manufacture Engineer Lead - Engineering - Design Transfer - Basel - Global Manufacturer- Manufacturing Engineering Manufacturing Engineer - Mechanical Engineer with 3 + years of experience in Manufacturing engineering. The successful Manufacturing Engineer will have worked on several projects and provide the link between R&D and Production. Working with a Global Manufacturer in Basel, supporting design engineers in QM and feasibility of designs, including design phase reviews and design to manufacture capabilities. You will approve process documentation and liaise closely with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes. Medical Device/Automotive/Chemical industry experience desirable. Develop, evaluate and improve manufacturing methods, utilizing knowledge of product design, parts & materials. Also fabrication processes, tooling and production equipment capabilities, assembly methods, and quality control standards in close co-operation with sites. Support manufacturing site engineering team to plan, direct, and coordinate manufacturing processes.... (more job details)

Resident Engineer/Design Responsible Engineer Resident Engineer works on-site to assist in the development and integration of premium audio systems into new vehicle designs. The Resident Engineer will interface with engineering (mechanical, electrical, and audio) to define system requirements, investigate design and mechanization alternatives, and resolve vehicle packaging trade-offs, leading to cost-effective, manufacturable designs. Additional responsibilities include communication of customer requirements to team, participation in requirement reviews and design reviews with development teams, and serving as an interface between Client and support groups for questions outside your area of expertise. Objectives for this position: Manage part releases and engineering changes in customers systems and processes Package audio components into vehicle environment complying with all customer and requirements within program timing and cost constraints Complete customer design reviews and part releases on-time per program schedule Monitor and resolve pre-production build issues at customer site Support launch and post-SOP production issues Requirements BS... (more job details)

Quality Engineer needed for company in Charlotte, NC for a 7-8 month contract! Pays up to $23 per hour Assists in formulating quality standards, policies, programs, plans, procedures, and practices. Performs routine statistical analysis as related to quality. Analyzes production limitations and problems for continuous improvement opportunities. Assists in the implementation of Quality Mgmt Systems and Techniques, (QMST). Conducts routine audits and/or surveys to determine acceptability of quality controls. This position is in the Gas Turbine Quality Management organization in Charlotte, North Carolina. The role is to support development of electronic quality control documents. The ideal candidate will have a working knowledge of blueprint reading and programming, ideally Infopath. The candidate should have strong interpersonal skills and the ability to work independently following initial instruction. Educational preference is a background in mechanical, industrial or computer engineering. Only local candidates will be considered as no relocation or per diem is available.... (more job details)

Manufacturing Engineer Job #2823 Cleveland area, Ohio Compensation: $23.00 - $30.00 per hour. Local company in the Cleveland, Ohio area is looking for an experienced Manufacturing Engineer to fill a current opening. Requirements: Two or four year technical or engineering degree or equivalent experience and skills (Mechanical preferred) Minimum two years working within technical engineering and manufacturing organizations Must be very "at home" in a manufacturing environment and be immediately productive Proficiency and experience with computer software tools including: - Microsoft Office - Basic image manipulation in programs such as Microsoft Paint, GIMP, or Photoshop - Email communications - Internet research - Experience with ERP/MRP system(s) - Pro Engineering or other CAD experience desired - Technical aptitude and experience - Able to learn, understand, and apply technical subject matter - Able to learn, understand, and apply technical organizational processes - Strong attention to detail - Strong organizational skills - Strong... (more job details)

Electrical Engineer Continental Shifts A position has become available as part of the Engineering team at inspirepac Ltd, which is a leader in the printed corrugated carton industry The successful applicant will play a hands-on role carrying out maintenance tasks as required, assisting the Engineering Manager in the effective running of the department. The position requires a pro-active individual with experience of automated manufacturing machinery within an FMCG environment Good fault-diagnostic skills are essential. You will be familiar with project-based work, be committed to health and safety, working with our production team to improve efficiencies through good preventative and operator maintenance. An understanding of computer maintenance systems along with knowledge of corrugated machinery would be advantageous The ideal candidate will be qualified to the following levels or equivalent: 16th or 17th edition electrical regulations HNC level qualifications Plc & electronics experience preferable Mechanical experience There would be future career opportunities... (more job details)