Mechanical Design Engineer Associate-1200706 BASF is proud to be an Affirmative Action and Equal Opportunity Employer. Description Support the development of basic and detailed design of new plants and their infrastructure as well as additions or modifications to existing facilities, in coordination with other Design Disciplines and Project Managers. Responsible for Mechanical Engineering compliance with project requirements on quality, cost and schedule for assigned projects. EXPERIENCE REQUIRED IN: - Preparing mechanical specifications and performing bid evaluations for: - stationary equipment (pressure vessels, storage tanks, heat exchangers) - rotating equipment (pumps, compressors, agitators, blowers and their drivers - Reviewing Vendor drawings for specification compliance. - Providing mechanical engineering discipline input into project schedules. - Monitoring the type of work described above when performed by outside contractor engineers and designers, for specification compliance, timeliness and cost effectiveness. - Interpretation and adherence to BASF Technical Standards, industry standards and regulatory codes. EXPERIENCE DESIRED... (more job details)

Mechanical Design Engineer III-1200645 BASF is proud to be an Affirmative Action and Equal Opportunity Employer. Description Support the development of basic and detailed design of new plants and their infrastructure as well as additions or modifications to existing facilities, in coordination with other Design Disciplines and Project Managers. Responsible for Mechanical Engineering compliance with project requirements on quality, cost and schedule for assigned projects. EXPERIENCE REQUIRED IN: - Preparing mechanical specifications and performing bid evaluations for: - stationary equipment (pressure vessels, storage tanks, heat exchangers) - rotating equipment (pumps, compressors, agitators, blowers and their drivers - Reviewing Vendor drawings for specification compliance. - Providing mechanical engineering discipline input into project schedules. - Monitoring the type of work described above when performed by outside contractor engineers and designers, for specification compliance, timeliness and cost effectiveness. - Interpretation and adherence to BASF Technical Standards, industry standards and regulatory codes. EXPERIENCE DESIRED... (more job details)

Senior Mechanical Engineer Location: CA-ON-Mississauga Job ID: 2012-7091 Area of Interest: Mechanical Engineering Job Type: Full Time # of Positions: 1 Education (Minimum): Bachelors Degree Experience (Years): 10 SLP: J2WMINE, J2WN/A Job Responsibilities: Golder Associates is seeking a Senior Mechanical Engineer to join its Paste Engineering and Design Group in Mississauga.Your duties will include but will not be limited to the following: - Visiting client facilities, typically at mine sites, throughout the world; - Preparing, writing and reviewing proposals and project reports; - Performing conceptual, feasibility and detailed mechanical engineering design to fully develop equipment specifications, plant layouts, P&ID's, piping and valving specifications and equipment lists; - Providing the project mechanical leadership by handling all tasks required by a Sr. Mechanical Engineer with expertise in heavy industrial mechanical equipment for mine infrastructure; - Supervising the technical work and mentoring of junior technical staff within the context of the mechanical deliverables... (more job details)

Job Number: 1516705 Business GE Energy Business Segment: Energy - Oil & Gas About Us: GE's Oil & Gas business is a leader in the development and delivery of advanced product and service offerings for the global oil and gas industry. As a consequence of the rapid expansion of its technology base, GE's Oil & Gas is capable of addressing the largest and most complex engineering and application challenges entirely from its own worldwide resources. So whether it's the world's largest LNG compression trains, re-injection of high sulfur gas, enhancing the safety and productivity of the world's oil and gas pipelines, or equipment for the production of oil and gas from harsh environments, GE is leading the charge. Oil & Gas acquired PII Pipeline Solutions in March 2002. The business is a worldwide technology leader in the inspection of oil and gas pipelines with an international presence in 8 major... (more job details)

Outstanding opportunity to develop your skills Brisbane based role with travel and FIFO options Immediate Start - Permanent Position up to $150K Package Overview This company has a commanding presence in this lucrative sector and need you to get involved. They are looking for a motivated Mechanical Engineer to support the delivery of a range of business critical projects at site. This position provides valuable input into vital projects from office to site and provides key mechanical expertise including; Tender review and forward plan preparation. Resource allocation and effective usage monitoring. Provision of advice and expertise to construction and commercial depts. Approve mechanical requirements of plant specifications. Ensure all quality standards and specifications are met. You The ideal applicant for this pivotal role needs to be a strong, fluent communicator with significant relevant project delivery experience. Other attributes include; Experience managing the safety requirements and workload for contractors on site.... (more job details)

Queensland Based - live and work by the coast Relocation package Career Development - position vacancy due to promotion Company Commencing operations in 1983 this major player to the mining industry plays an integral part of the supply chain of coal to the international market. The operation works around the clock and has the capacity of moving 85 Mtpa. Employing approximately 300 employees they have an uncompromising dedication to ensuring the safety of their people and the surrounding community. Due to a promotion they now are looking for a Mechanical Maintenance Engineer. Role Reporting to the Senior Maintenance Engineer the purpose of the position is to provide engineering advice to the asset management teams to achieve optimum reliability, availability and maintainability of plant equipment to meet business requirements. Responsibilities Identify maintenance improvement initiatives, analyse and develop solutions to regular or reoccurring problems Recommend and implement changes to business practices such... (more job details)

Mechanical Engineer - Netherlands - 12 Months My client requires a Mechanical Engineer for a 12 month role in the Netherlands. Essential Skills Experience with mechanical construction and material properties. Knowledge of piping standards and classification, Knowledge of PED regulations. Experience in strength, weight, stress, flow profile and pressure drop calculations. Location: Netherlands Duration: 12 month contract If interested please send an updated CV.

Mechanical Engineer/Hydraulics/ProArc/Mechanical Engineer My large Oil and Gas client in Norway require a Mechanical Engineer with hydraulics systems experience for a long term contract role in Norway. The Role Working with ProArc & Work package's. You will be reviewing vendor bids and drawings, attending meetings etc Essential Skills Strong Mechnical Engineer experience.MUST* have hydraulics experience Must have ProArc experience Start - ASAP but can wait up to 4 weeks Rate - excellent daily Contract - 6 month rolling (potential for long term) Mechanical Engineer/Hydraulics/ProArc/Mechanical Engineer

Mechanical Engineer (Rotating) - Contract - UK - Excellent Rates Role: Mechanical Rotating Engineer Type: Contract Length: 6 months rolling Location: UK Rates: Excellent Rates I am currently looking for a mechanical rotating equipment engineer with oil and gas experience specialising in compressors (turbo compressors, turbo generators, etc.). If you are interested please reply quoting JSMER170512

Mechanical Engineer/Electrical Engineer, (Submarine, Naval) Our client is the leading independent centre of engineering design, design support and technical services for defence customers. From concept design to acquisition support, in-service design and technology management, they are known for their innovation, expertise and ability to tackle the most complex design and systems issues. Their strong track record in naval platform design for surface warships, submarines and auxiliaries together with extensive acquisition support experience within land domain projects is thanks to their people. Position: Submarine Engineers Type: Permanent or Contract Location: Bath/Bristol Salary: Competitive £30,000 - £40,000 Benefits for permanent roles: An excellent remuneration package with a bonuses/profit scheme, a competitive pension scheme, subsidised gym/sports membership, 25 days holiday, employee discounts, additional holiday purchase and more. ROLE: They are currently looking to recruit a number of engineers to work with the Submarine Support Management Group. The roles are based Bath. DESIRABLE SKILLS/EXPERIENCE:... (more job details)

Mechanical Engineer, Intermediate Location: CA-AB-Calgary Job ID: 2012-7361 Area of Interest: Mechanical Engineering Job Type: Full Time # of Positions: 1 Education (Minimum): Bachelors Degree Experience (Years): 5 SLP: J2WN/A Job Responsibilities: Golder Associates is seeking an Intermediate Mechanical Engineer to join its dynamic Paste Engineering & Design Group in the Calgary office.Responsibilities include: - Perform conceptual, feasibility, detailed engineering plant design work. - Perform field work, data analysis and calculations. - Perform laboratory testing. - Be responsible for developing and writing equipment specifications. - On occasion be responsible for construction management and commissioning. - Write and review proposals & reports. - Mass balance and equipment sizing. - Preparation of RFQ documentation and technical review of equipment quotations. - Review of vendor drawings. - Pump and pipeline design including stress analysis. - Work on multidisciplinary designs with our electrical, process and structural groups. Job Requirements: The preferred candidate will possess... (more job details)

Mechanical Engineer Job # 2825 Akron/Canton area, Ohio Compensation: $50K to $58K Local Northeast Ohio manufacturer is seeking a Mechanical Engineer with 2 plus years of experience to add to their team. This position will require working in Tandem with other mechanical engineers to ensure design functionality. Primary function of this role will be the design/drafting of layouts, components, assemblies, and systems from specifications, drawings/sketches, models or verbal instructions for both new and existing product design. Requirements: A BSME degree Computer literate in CAD, Microsoft Office and Macola 2-5 years engineering experience Strong background in material selection and application Such alternatives to the above qualifications as the Company, in its discretion, may find appropriate and acceptable Responsibilities: Design parts/products to be optimized for manufacturability, serviceability, functionality, safety, appearance, cost, aesthetics, commonality, etc. Provide good engineering - innovation, functionality, cost control, manufacturability, life, safety, appearance, commonality, inventory control Provide good productivity... (more job details)

Mechanical Engineer Job #2824 Memphis, Tennessee Compensation: $42,000 - $52,000+ per year. Local Memphis Area Company is looking for a Mechanical Engineer to add to their staff. This role will lead into a Product Manager position. Position Requirements Include: A BSME Degree Knowledge/Experience with Valves is a huge plus Experience with C++, FORTRAN, and Java would be big plusses (used for updating their catalog - parts/prices) Required Computer Skills: Microsoft Excel Solid Works/Alibre 3-D Modeling Auto Cad Communication Skills (Written and Oral) Organizational Skills Mathematical Skills Reasoning Ability Self Motivator (Must be able to Multi Task) Position Responsibilities Include: Providing engineering and inside customer support for all aspects of the assigned product line to ensure functionality, quality, cost and accurate shipments Helping clients out with designing the right valve, making sure the right pieces/parts are there specifically for what function they are looking for (there is no going out and... (more job details)

Mechanical Engineer Job #2878 Akron/Canton, Ohio Compensation: $55,000+ per year. An original equipment manufacturer in the Akron area has an immediate need for an experienced Design/Automation Engineer to add to their team. The central role of this position will be to take machine design projects from concept to completion including in-shop troubleshooting and in the field start-up/de-bug. A hands-on engineer with strong mechanical aptitude, openness to working in the shop in Tandem with skilled trades' personnel, and an understanding of PLC controlled equipment is ideal. Areas of responsibility will include design concept/development, 3D modelling/generation of all engineering graphics, sizing/sourcing of components, purchasing/vendor interface, etc. Position Requirements Include: 3D Modeling experience, SolidWorks preferred Strong mechanical aptitude Mechanical/machine design experience Knowledge of machine shop practices Experience with hydraulics/pneumatics Position will require some travel up to 20% Candidates must have good planning skills and strong written/oral communication skills Desired Skills Include: Custom machine... (more job details)

Mechanical Systems Engineer Must have: Knowledge and understanding of Aircraft Systems and general aircraft operation Sound knowledge in the Mechanical Systems Specialist Technical area Technical experience throughout the air vehicle life cycle Ability to make sound Technical judgements in the Mechanical Systems specialist area Ideally would have: Knowledge and understanding of Military Aircraft Systems and general aircraft operation Knowledge and previous experience with, depending on position employed for: Heavy aircraft (eg C-130, A400, VC10) Helicopters (eg Merlin, Chinook) Combat Air (eg Typhoon, Tornado or similar) A sound understanding of evaluation and test methodology Customer interface experience in an Aerospace organisation Supplier interface experience in an Aerospace organisation Mechnical Systems Engineers require Minimum of an ONC or similar qualification in Mechanical/Aeronautical Engineering (or equivalent experience) Computer literate Team Player offering guidance and help to others to help inform decisions Flexibility Good communication, influencing, interpersonal and people management skills, and demonstrates ability... (more job details)

Mechanical Design Engineer - Engineering, Automotive, CATIA V5, Design, Mechanical, Closures JOB TITLE: Mechanical Design Engineer - £28 - £30 per hour - Midlands/North West ROLE: Contract - 6 - 12 Months LOCATION: Midlands/North West RATE: £28 - £30 per hour INDUSTRY: Engineering, Automotive, CATIA V5, Design, Mechanical, Closures Mechanical Design Engineer - Engineering, Automotive, CATIA V5, Design, Mechanical, Closures THE ROLE My client, a leading automotive organisation is looking for a mechanical design engineer to join its team due to an increased and ongoing workload. A contract role initially for 6 - 12 months, the mechanical design engineer will be responsible for carrying out mechanical design work on closures and sealing systems. The role will involve looking at designs, component and elements delivering design to support the vehicle program CANDIDATE EXPERIENCE The successful applicant will have a full working knowledge of CATIA V5 and have experience of mechanical concept... (more job details)

Mechanical Design Engineer - Pro Engineer Design Contract - Wildfire - Surrey. My Leading innovative technology client urgently requires the services of an Expert Mechanical Design Engineer to work on a long-term Programme of work. Requirements:. Experience with Pro Engineer, preferably with experience of Wildfire 4.0 with Intralink version 3.4 data management tools. Designing castings, sheet metalwork, mouldings, electronics packaging solutions and electro-mechanical module design. Duration: Initially 3 months with very likely long-term extensions up to 1-2 Years. Long-term assignment paying excellent rates. CPS Group (UK) Ltd is acting as an Employment Business in relation to this vacancy.

Mechanical Design Engineer - 6 months - South West My client is looking for a Mechanical Design Engineer to join their team, based in the South West of England. The start date for this role is ASAP. ESSENTIAL SKILLS: - MUST HAVE SC CLEARANCE - Excellent experience working within the Nuclear sector - Excellent working knowledge of Mechanical Handing - Good working knowledge of NX (Unigraphics), MathCAD and Inventor My client is looking for both Junior and Senior roles. If you are available and interested please send a copy of your current CV.

Mechanical Stress Engineer - FEA/Fatigue/ASME - SC Cleared We currently have a requirement for an SC Cleared Mechanical Stress Engineer to work in the area of Derbyshire for a 6 month contract. Our client requires experienced Mechanical Engineers with stress analysis skills to join our team. We have challenging projects requiring the detailed analysis, assessment and reporting of components and structures under steady state, transient and dynamic loads. Essential Criteria Experience in the following technical disciplines; Finite Element Analysis (preferably Abaqus) Fatigue and fracture assessment (preferably using Abaqus and R6 code) Stress analysis by hand calculation Assessments using ASME III Boiler and Pressure Vessel Codes Formulating Safety Justifications Furthermore, the successful candidate will demonstrate; A sound understanding of mechanical engineering principles and their application to varied projects and domains A desire to be challenged Desirable Criteria Experience in the following industry domains; Steam-raising power plant and components (pressure vessels, heat... (more job details)

Mechanical Design Engineer - Solid Edge - Surrey - 6 Month+ Contract - URGENT My client are looking for a Mechanical Design Engineer with Solid Edge experience (CATIA V4/V5 considered). The ideal candidate will have Aerospace experience. The client are willing to offer a 6 Month contract with extensions likely. Key Skills Solid Edge (CATIA V4/V5 considered) Desirable Skills Aerospace Experience Interviews are taking place this week. The client will be willing to wait up to 2 weeks for the right candidate.