Production Team Leader (Graduate, Manufacturing) BLUP3930 Derby, Derbyshire CIRCA 18,000 Our Client is the UK's No. 1 informal tableware brand, synonymous with quality and award-winning product design. Their craftsmen have been manufacturing high quality pottery at the impressive factory site at Derby in Derbyshire for over 200 years and their production team are among the best in the business. The role of Team Leader is a key role within the production management team; challenging certainly, but highly rewarding. This is a front-line leadership role, very much 'hands-on', requiring tenacity and good management practice. Within this role, you will have direct day-to-day responsibility for approximately 16 team members across a range of production processes requiring effective planning and organising of manpower and materials to ensure production targets are achieved.You will also be responsible for daily measurement and reporting of production performance in terms of volume, quality and plant effectiveness, and you... (more job details)

The key responsibilities of the position will include: Ensuring Key Performance Indicators in area are met Planning and co-ordinating team activities in line with customer requirements Developing and reviewing procedures and policies for assigned areas ensuring the correct methods and procedures are being used and laid-down quality standard achieved. Supporting short and long range goals consistent with manufacturing production teams and the company Continued improvement in all areas consistent with achieving service quality Assigning work and monitoring results Ensuring employees have required skills and cross training where required Introduction of best practices between manufacturing and support teams Ensure that safe working practices (including good housekeeping) are used in all areas and ensure compliance to health and safety procedures Ensure employees are trained in the efficient use of tooling and equipment. Advise Senior Production Group Leader of any below standard employees and recommend actions which should resolve the problems. Implementing and... (more job details)

Manufacturing & Tooling Engineer Location: Toronto/GTA $80-$90k Position Summary The Manufacturing &Tooling Engineer is responsible for the design and development of current and new tooling products and support Manufacturing and Engineering Department to ensure tooling specifications and performance are meeting company standards. Principal Responsibilities The Manufacturing & Tooling Engineer is responsible to carry out the following duties in a timely and accurate manner and to communicate all matters positively and professionally: Establish tooling requirements and cost for new and or revised products. (Shared responsibility with Production Tooling Manager) Direct and design (using AutoCAD) the development and fabrication of new tooling (dies, gauges, fixtures and special tools) for the manufacturing process at optimum cost and schedule requirements within specified completion date and budgets. Identify part and tooling process improvements. ECN (Engineering Change Notice) evaluate and determine the feasibility of producing and implementing new parts and revised processes in order to meet... (more job details)

Production Engineer/Maintenance Engineer/Service Engineer Electrical/Mechanical Engineering Salary: £30,000 - Rotational Shift basis Commutable from: West Midlands, Worcestershire, Warwick, Birmingham, Redditch, Stratford-Upon- Avon, Kidderminster, Worcester, Coventry, Royal Leamington Spa The Company An opportunity has arisen to join a global leader in the manufacturing industry. The company prides itself on taking an innovative and dynamic approach to developing its product range in order to serve its expanding client base. The Role The Production Engineer will be responsible for upholding high operational standards within the plant and carrying out any required maintenance or repair work. Utilising their electrical and mechanical engineering, the production engineer will be reviewing production performance and suggesting improvements to increase plant efficiency and reduce waste. Working with maintenance technicians, you will be assisting with the day to day running of the plant and with any breakdowns. The Candidate The Production Engineer will be apprentice trained, hold a 17th edition... (more job details)

$80k to $85k Base plus superannuation Coffs Harbour - Northern NSW Location Long Weekend, Every Weekend, On The North Coast A market leading commercial manufacturing organisation, providing thermal heating solutions for a wide range of industries across Australia require an experienced Production Manager to join their operation in Coffs Harbour. The company prides themselves on investing in their staff in the areas of training and development as well as offering an attractive Work- Life balance. Reporting directly to the Managing Director, you will be required to plan, administer and review the manufacturing activities for the company to optimise resource use, minimise costs and maintain quality standards. Additional responsibilities include: Management of Production staff and allocation of duties. Plan and manage production flow and scheduling in accordance with delivery times and budget. Management of Occupational Health and Safety and Tool Box Talks. Liaise with Design Manager and team to identify scheduling... (more job details)

OSRAM SYLVANIA is looking for a mid-career manager who is looking to move up quickly in a global organization. We are looking to fill this position with a manufacturing professional who knows the ropes now, but also wants to continue to grow his or her career. In particular, we are looking for someone who is interested in long term upward career growth in future larger manufacturing roles. Past employees in this role have moved up to Product Line Manager and Plant Manager and a few have been placed in Osram's global top talent program. OSRAM SYLVANIA is the #1 lighting manufacturer in North America and the leading automotive lighting supplier in the entire world. Our products feature innovative design and energy saving technology. Our current focus on Solid State Lighting and LED technology puts us in the forefront of lighting innovations. Join us on the cutting edge of lighting technology... (more job details)

Job Title Operations Manager Location Scotland Salary: £55K plus company Car and Blue Chip Benefits Reports To Factory Manager Reports: Lead Section Manager, Section Managers 1. Overall Purpose 1.1 On site senior management responsible for the control and co-ordination of production and support activities to achieve manufacturing objectives for the factory. 1.2 To contribute to manufacturing strategy development for Site 1.3 Potential to deputise for Factory Manager 2. Key Tasks 2.1 To ensure manufacturing practices for people safety (including Health & Safety and Hygiene) satisfy legal and corporate requirements. 2.2 To ensure manufacturing practices for product safety satisfy legal and corporate requirements and facilitate customer confidence. 2.3 To develop and achieve manufacturing budget and operating targets annually. Implement optimum cost reductive initiatives. 2.4 To ensure that all staff work effectively together under an integrated management structure to achieve manufacturing objectives. 2.5 To liaise with Supply Chain management to ensure optimum... (more job details)

Job ID: 120522 Senior Mechanical Design Engineer-120522 Description Gore is a technology-driven global company built on entrepreneurial innovation, integrity, and teamwork. Through our product leadership, we've been changing lives and changing industries, including medical devices, fabrics, electronics, and manufacturing, for more than 50 years. What can you change by joining Gore? Visit gore.com/change-life to find out. Job Description Wires and cables were Gore's first products, and Gore remains a leader in the field of signal transmission. Today, Gore's cable and material solutions for electronics provide reliability in the most demanding environments. These products have been used for more than 50 years in a variety of industries, including aerospace, industrial electronics, mobile communications, and semiconductor manufacturing. We are looking for an experienced, project-oriented Senior Mechanical Design Engineer to join our engineering team in New Garden, PA. If you are searching for a company where you can make a difference, we're looking... (more job details)

We have a long tradition of taking care of our customers and employees, so come join our team! We are a leading manufacturer of residential building products and we are expanding our company and need a great candidate to fill the position of Senior Electrical Engineer. WHAT DOES THIS JOB ENTAIL? The Senior Electrical Engineer will be engaged in the design and development of printed circuit boards incorporating RF circuits used for control, communication, and monitoring of commercial electronic products. Architect, design and develop printed circuit boards for high volume applications. Scope encompasses the entire electrical design life cycle including product concept generation, requirements generation and analysis, detailed design activities including: schematic capture, PCB layout, and design verification as well as activities up to production launch. Important skills requirements are in the areas of power conversion, motion control, microcontrollers, transformers, circuit simulation, component engineering, and analog and digital design. General... (more job details)

We have a long tradition of taking care of our customers and employees, so come join our team! We are a leading manufacturer of residential building products and we are expanding our company and need a great candidate to fill the position of Shipping & Receiving Supervisor. WHAT DOES THIS JOB ENTAIL? The Shipping & Receiving Supervisor will be responsible for planning, organizing, and monitoring the shipping & receiving departments. Supervise workers who confirm and record the receipt of shipments, prepare items for shipping, and load and unload trucks. Also responsible for managing the inter-departmental transport of materials. Supervise workers who confirm and record the receipt of shipments, prepare items for shipping, and load and unload trucks. Manage the inter-departmental transport of materials. Plan and coordinate work, train and motivate, monitor and evaluates performance of production employees, ensure their ability to safely operate material handling equipment to develop and produce... (more job details)

OSRAM SYLVANIA is well known as a systems solution provider and our LED solutions are no exception. LED systems are quickly becoming the light source of choice for hundreds of applications thanks to their ruggedness, reliability, long life, energy efficiency and low maintenance requirements. LED technology is the future and OSRAM SYLVANIA is the futures leader. We are fully committed to and focused on developing the technology and products necessary to create category-killing LED solutions for the market. Responsibilities: - Perform analysis to develop design options or recommendations for LED systems and components. - Ensure compliance with government and organization engineering standards. - Work on a combination of engineering specialties covering more than one discipline. - Plan and executes complex design and development projects. - Contribute to the intellectual property of the company. - Work with limited supervision. - Travel required for customer/supplier visits. - Responsible for the complete product... (more job details)

Manager Engineering AkzoNobel is proud to be one of the world's leading industrial companies. Based in Amsterdam, the Netherlands, we make and supply a wide range of paints, coatings and specialty chemicals. In fact, we are the largest global paints and coatings company. We have an opening for an Engineering Manager at our Huron Ohio manufacturing site. This position is responsible for managing the Plant Engineering function including capital spending, technical support, power and facility maintenance, and energy control to assure the most effective utilization of available capital for improved productivity and profitability Responsibilities include: Maintenance: Responsible for the planning, coordination, and supervision of the plant maintenance staff who are engaged in the repair, installation, and preventive maintenance of equipment, machinery, of the Resin Plant in Huron Ensures performance of critical utility systems to protect assets and to ensure uninterrupted support to manufacturing operations at minimum cost. Ensure resources are... (more job details)

Job role: Engineering Manager Salary: 65K plus company Car and Blue Chip Benefits Location: Scotland Reports to: Factory Manager Job Purpose -Manage and provide an effective engineering function, which supports maximum operational effectiveness of site plant, equipment and systems, in a safe and hygienic environment -Manage site capital projects from inception through to benefit delivery. Job Scale -Engineering resource budget (labour) £ 2.5m pa -Engineering Materials Budget (including service contracts) £1.3m pa -Capital Investment Budget (typical) c.3.3m pa Direct Reports: Area Engineering Managers, Stores Manager, Electrical& Control Manager Key Accountabilities: -Ensure that all plant, equipment and systems are provided and maintained with suitable and sufficient protection as defined in legislation -As part of the senior management team, lead a team of approximately 60 employees that successfully reconciles safety, efficiency and reliability with the requirements of complex, high volume production -Develop and seek to continually improve the Health, Safety and Environmental... (more job details)

Pace-O-Matic is committed to creating and providing the gaming industry's best products and experience. At Pace-O-Matic, you have a personal opportunity in an inspiring environment to make a difference. Build a career that you will be proud of. Help shape a new era in the gaming industry. The Technical Project Manager is responsible for managing end-to-end delivery of gaming services from the Pace-O-Matic gaming portfolio in support of our markets, service line, or group of services. The position is a central Point of Contact for an assigned service area and will interface directly with Executives, Developers, System Engineers and the various other groups within Pace-O-Matic. The position will report to the Vice-President of Operations. Our culture is founded on openness, collaboration and honesty, with colleagues who are brilliant in their field, resilient, and above all, strive for the best. One team, where everyone makes a difference and everyone is heard.... (more job details)

Manufacturing Manager West Yorkshire £50,000 plus bonus, pension & benefits Our client, part of a profitable and rapidly growing Group, is a leading food manufacturer supplying the major multiples with a broad range of branded and own-label products. The company is a leader in its core markets both locally and globally, and has an enviable reputation based on a commitment to innovation, quality and exceptional levels of customer service. Based at one of the company's key manufacturing facilities, which has recently benefited from investment in new manufacturing technology, this role will have responsibility for leading a multi-functional team in the achievement of demanding production, cost, quality and health & safety targets. The main emphasis of the role will be on providing a clear sense of purpose and direction to a non-unionised workforce whilst driving continuous improvement through the implementation of robust systems, processes and working practices. Candidates, of degree calibre,... (more job details)

Production Facilitator - Netherlands - Production Facilitator Introduction The TwinScan Factory is responsible for the production of wafer steppers and scanners. The complete production process of the most advanced machines takes place within Manufacturing. For the production processes tools are required for building and testing the machine. Job Mission The Production Facilitator reports to Team leader Tool Control Center. Internal interfaces with TF Delivery Operations, Development & Engineering, Process Technicians, Manufacturing Engineering and Equipment Support. Job Description In this function you will facilitate production by providing them with the correct tools, at the correct moment, with the correct quality and at the correct place. Main tasks are: - Lend out and lend in of tools - Checking tools on completeness and correctness - Periodically check inventory - Clean and pack tools - Making sure tools are well maintained (calibration, certification, etc) - Have an active role in (team) meetings -... (more job details)

PRODUCTION MANAGER We have an excellent opportunity for an experienced Production Manager to join our NanoScience business. In this role you will ensure that all available materials and resources meet current business needs to fulfil the production schedule. You will manage, direct and co-ordinate the production facility to ensure that KPIs and other targets of safety, quality, productivity and cost are met, whilst fostering a culture of continuous improvement and customer satisfaction excellence. Through world-leading capability and experience in advanced cryogenics and applied superconductivity, Oxford Instruments NanoScience delivers solutions which meet the exacting needs of scientists working at the forefront of fundamental physics, applied physics, materials science and next generation device development. Oxford Instruments plc is a global company with manufacturing facilities, offices and service centres, worldwide and an annual turnover of over £270m. The role: Agree and fulfil the production schedule; Assist in the formation, review and communication of... (more job details)

Valeo Sylvania, a leader in the automotive lighting industry, is seeking a Manufacturing Operations Manager (APU). The successful candidate will: Plan, direct and administer all production functions in a molding & coating operation and/or headlamp assembly operation, through the use of sound management practices, ensuring all manufacturing goals are met. Guarantee enforcement of quality including functions accommodated. Promote and deploy continuous improvement approach and quality tools. Ensure production cost structure is competitive with global competitors. Ensure all product goals are met. Is the functional manufacturing manager for a defined area or group of products within the facility. Initiate and/or coordinate production schedules to assure productive flow of product while meeting customer demand. Ensure definition and application of standardized work for all repetitive production processes. Continuous improvements are expected and must be documented in products, processes, equipment, and employee relations. Through the direct supervision of immediate subordinates (with assistance from HR),... (more job details)

Position - Production Manager Salary - Competitive Location - Essex The Company: A global provider and manufacturer of driver interface products, currently supplying into the commercial vehicle industry. The company has a number of sites all over the world and are looking to expand even further within the next 5 years, hence the reason for such a position has come about. The Role as a Production Manager: You will need a good understanding of Lean methodologies such as 5S, Kanban to implement such tools across your department to solve problems and drive the performance of Production. You will be a leader of a team promoting Continuous Improvement within. You and your skill set as a Production Manager:.Understanding of Lean tools and their implementation such as 5S, Kanban, Kaizen, Six sigma.A solid manufacturing/production background.Experience managing ERP systems.Good time management.Able to analyse data and deliver figures This is a sensational opportunity to... (more job details)

Kforce is currently seeking a Manufacturing Product Support Engineer for and opportunity in Denver, Colorado. This individual will be responsible for the on-going engineering support of our disposables product lines. This support includes; product and process quality enhancements, investigation and resolution of production issues, ensure product compliance with applicable FDA and ISO regulations and guidelines, periodic 24x7 floor support via phone or in person and other duties as assigned. Main Duties: Partner with others across the organization to ensure compliance with FDA, GMP, and ISO requirements Develop and validate new and existing manufacturing processes Write and execute Engineering Change Orders (ECO's) required for assigned product line Provide support to associates in the field as well as other internal departments Maintain Failure Modes Effects Analysis (FMEA's) documents for assigned product line Partner with the Global Product Quality organization in support of the QMS Provide training support to production areas for significant... (more job details)